X1CR Pro FT BB option parts

HN#399 3-Pin Steel Flywheel HN#399 3-Pin Steel Flywheel Hong Nor like to introduce to you our latest spare parts for all 1/8 Off-Road buggies. Get the advantages that some pro drivers have enjoyed for sometime now. The new...

#393 Red Alloy Long Life clutch shoes The #393 clutch shoes are made of a special alloy material. The #393 shoes have 10% silicon material that not only increase's the clutch grip but also provides a long life span....

#105 Clutch bell 14 teeth 14 tooth vented hard steel clutch bell. Includes 2pcs 5mm x 10mm sealed bearings.

#174c-gold 1.1mm clutch springs 1.1mm gold clutch springs. These will engage the clutch later than the 1.0mm springs which will result in a faster take off. Gives better take off on grass but can be harder to drive on dirt.

#333B Alum. clutch shoe (blue) Alloy clutch shoes are used when an agressive take off is required, like on astro turf. 3pcs supplied with two different springs for fine tuning. ***Will also fit HPI Savage and most other 1/8...

#363 Light aluminium cross pins for diff 6pcs Hard coated light weight diff pins. Lower rotating mass for increased acceleration.

X1S-40 Machined light weight chassis A CNC hard coated machined light weight chassis. 35 grams lighter than an X1CR Pro chassis for increased acceleration and more nibble handling.

X1S-38 Light weight center diff posts Light weight center diff mount posts. Hard coated aluminium.

X1S-12 2.5 deg rear toe in plate A 2.5 degree rear toe in plate. More rear toe in = more rear grip. Less rear toe in = less rear grip.

X1S-14 3.5 deg rear toe in plate A 3.5 degree hard coated rear toe in plate. More rear toe in = more rear grip Less rear toe in = less rear grip

X1S-17 Alloy radio tray posts 2pcs of hard coated CNC machined radio tray posts. These posts given added stiffness to the radio tray mounting. More direct steering and consistent braking.

X1S-18 Alloy wing mount posts 3pcs CNC machined hard coated wing mount posts. These posts give added stiffness to the wing mount.

X1S-11 Engine mount (Lowered type) Machined alloy hard coated lowered engine mounts. These are they same height as the X1S-27 mono block. These mounts CANNOT be used with a pull start/roto start engine. If these are to be fitted to...

J-29 Servo saver spring (heavy duty) Heavy duty servo saver spring. Stiffer than J-29A.This spring is STD in the X1CRT. This spring is suitable for use in the X1CR Pro model when racing on high traction surfaces like dry grass or astro...

J-52 White wing (1/8th off road) High quality strong, virtually unbreakable white wing.

X1S-20 Front anti roll bar set (2.3mm, 2.5mm) Front anti roll bar set. Used to tune the amount of body roll on the front of all X1CR models.

X1S-21 Rear anti roll bar set (2.3mm,2.8mm) Rear anti roll bar set. Used to tune the amount of body roll on the rear of all X1CR models.

X1S-20b Front anti roll bar (2.5mm) A 2.5mm front anti roll bar.

X1S-21b Rear anti roll bar (2.8mm) A 2.8mm rear anti roll bar.

X1S-28 CNC 7075 Rear anti squat plate 1deg 1 degree rear anti squat plate.