Ultra LX-1

X1-36 Front C hubs A pair of replacement front C hubs. Fit X1CR Pro, X1CR RTR and X1CRT.

X1-31 Shock ball end post. Shock ball end post. This item is made from hard steel and is used to securley locate the top of the shock on the shock tower. This part is std on X1CR, X1CR RTR and X1CRT.

X1-27 Knuckle arm bushing X1CR, X1CR RTR and X1CRT knuckle arm bushing. This bushing is used in the unique captive king pin system used on the X1CR range of cars. Made from hardened steel for super long life.

#139 Manifold spring A pack of 2 manifold springs.

#151 Exhaust connector Rubber gasket for use between the engine and the exhaust manifold (header). 2pcs

#155b Body clips Large body clips.

#174A 3 pin 37mm flywheel Precision machined alloy 37mm flywheel with three hardened pins.

#174B graphite clutch shoes black graphite clutch shoes (3pcs). Graphite shoes give a progressive take off on 1/8th buggy.

#174c-gold 1.1mm clutch springs 1.1mm gold clutch springs. These will engage the clutch later than the 1.0mm springs which will result in a faster take off. Gives better take off on grass but can be harder to drive on dirt.

#180D Pilot shaft Pilot shaft set. This part is used to reatin the flywheel on SG crank type engines (long crank).

#195 Engine mounting screw Engine mounting screw for use on all X1CR cars. Large head size makes retaining the engine in its chosen position more reliable. Use with a 3mm allen key.

#264B Tapper cone A tapper cone used for acurate location of the flywheel to the engine crankshaft.

#267d 8 x 16mm bearing A pack of 8 pcs of precision 8 x 16mm sealed bearings.

#267e 2.5mm x 17 pin 4pcs of 2.5mm x 17mm pin. Used for retaining the wheel hexes onto the drive shaft.

#315A shock shaft set (FR) A pair of front shock shafts, pistons, washers and nuts. ****PLEASE NOTE, pistons included with these shafts are for the small bore shocks ****

#315s Shock re-build set. A complete set of seals for re-building 4 shocks.

#356 Air filter (complete) A complete 2 stage air filter suitable for use on all 1/8th scale buggy and trucks. Fits majority of .21 - .30 engines.

#356a Replacement air filter foam 2pcs of inner and outer replacement foam for the air filter.

#356b Air filter connector Rubber air filter connector. Fits between engine and filter. 1pc

#365b Big bore shock body 2pcs of Big bore shock body and 2pcs of big bore shock cap.