SMD - Nitro RC Cars, RC Options, RC Hopups, RC Spares, RC Accessories

Chesterfield Derbyshire England, United Kingdom, support@s-m-d.co.uk

X1CRT Pro FT SE

http://www.s-m-d.co.uk

06:19 07-Sep-2010

#180D Pilot shaft Pilot shaft set. This part is used to reatin the flywheel on SG crank type engines (long crank).

#195 Engine mounting screw Engine mounting screw for use on all X1CR cars. Large head size makes retaining the engine in its chosen position more reliable. Use with a 3mm allen key.

#264B Tapper cone A tapper cone used for acurate location of the flywheel to the engine crankshaft.

#267d 8 x 16mm bearing A pack of 8 pcs of precision 8 x 16mm sealed bearings.

#267e 2.5mm x 17 pin 4pcs of 2.5mm x 17mm pin. Used for retaining the wheel hexes onto the drive shaft.

#312 Universal servo horn set Universal servo horn set for all popular makes of servo. Complete set for throttle and steering. Splined inserts for different servo makes.

#315A shock shaft set (FR) A pair of front shock shafts, pistons, washers and nuts. ****PLEASE NOTE, pistons included with these shafts are for the small bore shocks ****

#315s Shock re-build set. A complete set of seals for re-building 4 shocks.

#333B Alum. clutch shoe (blue) Alloy clutch shoes are used when an agressive take off is required, like on astro turf. 3pcs supplied with two different springs for fine tuning. ***Will also fit HPI Savage and most other 1/8...

#356 Air filter (complete) A complete 2 stage air filter suitable for use on all 1/8th scale buggy and trucks. Fits majority of .21 - .30 engines.

#356a Replacement air filter foam 2pcs of inner and outer replacement foam for the air filter.

#356b Air filter connector Rubber air filter connector. Fits between engine and filter. 1pc

#365 Big bore Front shock set. A complete pair of front big bore shocks, including springs. Optional for the X1CR RTR and X1CR Pro UK. Fitted as standard to the awesome X1CRT and X1CR Pro UK FT.

#366 Big bore rear shock set. A complete pair of rear big bore shocks, including springs. Optional for the X1CR RTR and X1CR Pro UK. Fitted as standard to the awesome X1CRT and X1CR Po UK FT.

#365b Big bore shock body 2pcs of Big bore shock body and 2pcs of big bore shock cap.

#365c Big bore shock cap 2pcs Shock cap for the big bore(#365,#366) shocks.

#365d Big bore shock spring adjusters 4 pcs of big bore shock spring adjusters. Hard coated.

#365f 15 x 1mm adjuster o ring 4pcs of O ring used inside the big bore shock adjuster rings to stop the ring slipping.

#365p Big bore shock piston 4pcs of Big bore shock piston.

#366b Big bore rear shock body 2pcs of big bore rear shock body. 2pcs of big bore cap also included.